Home / Resources / How to compare viscosity measuring cups in seconds to centipoise

How to compare viscosity measuring cups in seconds to centipoise

A cup second is not a centipoise. Convert efflux time to centistokes, then multiply by specific gravity. The original PDF is the chart. Call 800-249-0337.

Preview · about 1 minute

Plant-floor overview. Unlock below for the full converter checklist.

The original PDF is a viscosity conversion chart: cup seconds (Zahn, Ford, Shell, and related cups), Gardner bubble, Stormer/graphic, and Saybolt Seconds Universal (SSU) against centipoise. Use the PDF for the grid. This page is how to read it without mixing units.

Summary: what a viscosity cup measures

Dip the cup, lift it, and time until the stream breaks. That efflux time reflects kinematic viscosity (flow under gravity), usually expressed in centistokes (cSt). Centipoise (cP) is dynamic viscosity. For a given liquid, cP is about cSt times specific gravity, at the temperature you measured.

  • Report a cup result as seconds, cup number, and temperature (for example “22 s, Zahn #2, 77 F”), then convert if a spec calls for cP.
  • Zahn and Shell cups follow ASTM D4212. Ford cups follow ASTM D1200.
  • Do not mix cup brands without checking the chart. A Ford #4 second is not a Zahn #4 second.
  • Stay inside the cup's drain-time window, or the conversion does not hold.
  • Measure at the temperature in the TDS.

Quick answers

Is a cup second the same as a centipoise?

No. A cup second is an efflux time and reflects kinematic viscosity, usually expressed in centistokes (cSt). Centipoise (cP) is dynamic viscosity.

How do I convert cup seconds to centipoise?

Convert the efflux time to centistokes with the equation for that cup, then multiply by the liquid's specific gravity at the temperature you measured. The full guide lists the Zahn cup equations.

Can I check hot melt viscosity with a cup?

No. Hot-melt viscosity is a Brookfield number at application temperature, not a cup second.

The full guide adds the Zahn #1 to #5 conversion equations and related Cattie grades.

What's in this guide

  • What a cup actually measures
  • Typical Zahn conversions (ASTM D4212)

Longer plant training (5–10 min)

Coming soon — downloadable deep-dive for the floor.

General plant guidance only — not a substitute for your process, SDS/TDS, or line trials. Call 800-249-0337 to match a grade.

Need an adhesive or a sample?

Call 800-249-0337 or email sales@cattieadhesives.com. Cattie Adhesives, Quakertown, PA.