Home / Products / Heat Seal & Barrier Coatings

Heat Seal & Barrier Coatings for Paper Packaging

Barrier and heat seal coatings for paper. Call for a match to stock, coat weight, and seal temp.

Demand is up for heat seal adhesives and barrier coatings on paper packaging: form-fill-seal, stand-up pouches, and single-use food packs. These coatings are designed for repulpable paper structures; test your structure.

Why run them together

The hard part is barrier and heat seal without a multi-layer plastic stack (PE, EVOH, PET) that cannot be separated at end of life. The barrier coating holds out water, moisture vapor, oil, and grease. The heat seal coating is coated and dried now, and heat reactivates it to form the bond later, in-line or offline.

Water-based heat seal and barrier coatings can replace a thicker extruded polyolefin layer, often at a lower coat weight.

What to check

Paper usually needs a double bump so the film is continuous and pin-hole free. Grade and coat weight depend on smoothness, porosity, and holdout. Cobb, dye stain, oil/grease resistance, MVTR, and OTR are the checks. Heat seals are sensitive to substrate and sealing conditions.

Where they run

  • Form-fill-seal and stand-up pouches
  • Food and flexible packaging
  • Yogurt lidding and blister packs
  • Sugar and flour bags
  • Fast-food carton board
  • Protective wraps

Pick the line

Heat seal and barrier coatings FAQ

Running paper packaging that needs barrier and heat seal? Each line has its own buyer FAQ: stock, coat weight, seal temp, and how to get a sample.

Can water-based heat seal and barrier coatings replace a plastic layer on paper?

In many paper packs, yes. Water-based heat seal and barrier coatings can replace an extruded polyolefin layer, often at a lower coat weight, and avoid a multi-layer plastic stack (PE, EVOH, PET) that cannot be separated at end of life. Whether they can replace it depends on the barrier and seal your pack needs, so test your structure.

Can Cattie heat seal and barrier coatings be used in recyclable paper packaging?

Our water-based barrier coatings and paper heat seal coatings are designed for repulpable paper structures. 9169-HS, a water-based emulsion heat seal for paper packaging, passed independent lab recyclability testing in tested paper structures. Results depend on your full structure, including paper, inks, coat weight and sealing conditions, so test it on your own line before use.

What should I check on a paper heat seal and barrier structure?

Paper usually needs a double bump so the film is continuous and pin-hole free. Grade and coat weight depend on smoothness, porosity, and holdout. Cobb, dye stain, oil/grease resistance, MVTR, and OTR are the checks. Heat seals are sensitive to substrate and sealing conditions.

Heat seal adhesive FAQ · Barrier coatings FAQ · Call 800-249-0337 for a match.

Read before you run

Heat seal adhesives and barrier coatings for paper · How to select heat seal coatings for lidding · Barrier coatings for paper: moisture, OTR, oil, grease resistant · How to test paper and board for grease resistance using test kit solutions

Send board samples for a drawdown. Call 800-249-0337 for SDS, TDS, and activation temperature.

Call 800-249-0337 Contact us

Heat-seal film lid applied to a cup
Corrugated cardboard flute close-up

Need an adhesive?

Call 800-249-0337 or email sales@cattieadhesives.com. Cattie Adhesives, Quakertown, PA.